Hi Scotty I have a Ford Focus SE 2003 2.3 manual transmission but I been having problems with this…

Hi Scotty I have a Ford Focus SE 2003 2.3 manual transmission but I been having problems with this code P2004 I did change everything I just need to change 1 runner control valve.. But the code keeps coming what do you suggest to do?

P2004 FORD - Intake Manifold Runner Control Stuck Open Bank 1 Possible causes Intake Manifold Runner Control (IMRC) monitor signal shorted to power Faulty Intake Manifold Runner Control (IMRC) actuator Faulty Intake Manifold Runner Control (IMRC) solenoid Damage Powertrain Control Module (PCM) Blocked vacuum hoses What does this mean? Tech notes There is a factory service bulletin for the following Ford Models: 2005-2006 Mustang 2006 Explorer 2007 Explorer Sport Trac Ford Factory Service Bulletin OBDII Code P2004 2011 Ford Ranger w/2.3L Ford Windstar, Ford Freestar 2006 Ford F150 User Submitted Video What does this mean? When is the code detected? The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open. Possible symptoms Engine Light ON (or Service Engine Soon Warning Light) P2004 Ford Description The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm the vacuum solenoid will be energized. This will allow manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm , the vacuum solenoid will be de-energized. This will allow vacuum to vent from the actuator and the butterfly valve plates to open.

P2004 Ford - Intake Manifold Runner Control Stuck Open Bank 1

P2004 Ford - Intake Manifold Runner Control Stuck Open Bank 1

Possible Causes and Repair Information for P2004 Ford code. Learn what does P2004 Ford means? P2004 Ford Intake Manifold Runner Control Stuck Open Bank 1

P2004 FORD - Intake Manifold Runner Control Stuck Open Bank 1 Possible causes Intake Manifold Runner Control (IMRC) monitor signal shorted to power Faulty Intake Manifold Runner Control (IMRC) actuator Faulty Intake Manifold Runner Control (IMRC) solenoid Damage Powertrain Control Module (PCM) Blocked vacuum hoses What does this mean? Tech notes There is a factory service bulletin for the following Ford Models: 2005-2006 Mustang 2006 Explorer 2007 Explorer Sport Trac Ford Factory Service Bulletin OBDII Code P2004 2011 Ford Ranger w/2.3L Ford Windstar, Ford Freestar 2006 Ford F150 User Submitted Video What does this mean? When is the code detected? The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open. Possible symptoms Engine Light ON (or Service Engine Soon Warning Light) P2004 Ford Description The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm the vacuum solenoid will be energized. This will allow manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm , the vacuum solenoid will be de-energized. This will allow vacuum to vent from the actuator and the butterfly valve plates to open. P2004 Ford Information for specific Ford models P2004 2006 FORD FUSION P2004 2007 FORD FUSION P2004 2008 FORD FUSION P2004 2009 FORD FUSION P2004 2010 FORD FUSION P2004 2011 FORD FUSION P2004 2012 FORD FUSION

P2004 Ford - Intake Manifold Runner Control Stuck Open Bank 1

P2004 Ford - Intake Manifold Runner Control Stuck Open Bank 1

Possible Causes and Repair Information for P2004 Ford code. Learn what does P2004 Ford means? P2004 Ford Intake Manifold Runner Control Stuck Open Bank 1

More to read in Ask Scotty
false